loading, one second please...

Repair, Seal, Adhere!

Reviewing: Npi Mighty Putty  |  Rating:
By Geralyn Hydock on
Badge: Publisher | Level: 10 | Kitchen & Bath Expertise:

This putty does what it says it will do. It can fix, fill, and seal most anything in your house. Another great feature is that surfaces can be painted. machined, sanded, drilled, or tapped when the putty is fully set in about 24 hours. The kit comes wih three putty sticks, one glove, and instructions. It bonds and repairs almost any surface including, aluminum, fiberglass, glass, PVC. metal, tile, concrete, wood, ceramics, wall board, and more.

In order to use the putty, one needs to knead the stick. The stick is blue on the outside and white on the inside. Knead the stick until it is uniform in color. When done, apply to the surface which needs repair or has to be stuck up somewhere. Make sure the surface is clean before applying the putty. You can smooth out the surface with water on your finger. but make sure you do this before it begins to harden. It forms a bond in 30-40 minutes and you can use it after 60 minutes. It is best to let it sit for 24 hours.

There is a warning on the package for persons who may be allergic to the active ingredients. The putty contains epoxy resins and amine which may cause irritation to sensitive skin. Those who are sensitive to it may use the glove which is included inside the kit for protection.

The first item which I used the putty on was a small kitchen shelf. It was not broken but I wanted to adhere it to the outside of a kitchen cabinet. I placed ten pieces of putty on the back of it then I placed it up against the cabinet. I held it for a few seconds then it was attached. It has now been over a month and a half since I first adhered the shelf and it is still on the cabinet. The next item which I used it on was a broken rooster figure I had in my kitchen. The tail broke off so I applied a little putty one side of the tail and reattached it to the rooster. Before it hardened, I smoothed it out with a little water. The tail is still attached to my beloved rooster figurine.

This putty has definitely made me a believer out of it. I would definitely recommend it to others as I had nothing but good luck with it. Try it out for yourself and see how well it works!